IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY ManufacturerDry Hire PricesDay Hire: £12
|
DescriptionThe 12" Truss 2 metre Hinge Section is designed to allow the towers to be assembled horizontally at truss top level before being swung and locked in the vertical operating position. If the towers are not too high this can be done manually, else via the use of the Ground support lifting arms. The 30.5cm (12") Square Ground Support Tower is a system manufactured with the purpose of providing a lifting medium for the variety of Thomas Trusses ranging from the smallest General Purpose truss through to largest Supertruss. The Towers will provide the necessary equipment to support a truss rig in venues where the flying points are not strong enough or in the right place. Each Tower is capable of lifting 2 tonnes to a maximum height of 12 metres which must include the self weight of the truss rig and the motors. The truss rig is raised and lowered by means of CM Lodestar chains hoists, which can be rigged in the truss and work in double fall with the chain running over the Roller Beam at the top of the tower and connected onto the other side of the truss. The Tower Sections are manufactured from aluminium 6082-T6 - 5.08 cm x 3.2 mm thick wall tube with 2.54 cm x 3.2 mm wall diagonals and are connected together with Thomas truss bolts. The Tower Sections are made to allow 50 cm adjustments in height up to a maximum of 12 metres. Specification
|